Documentation
Tutorials
Download

Clocks

The Clocks window serves two purposes. The primary purpose is controlling clocks that are seen only on the stage display. The second is controlling countdown clocks that can be shown on the stage display, in a Message, or both.

pro6_unlimited_clocks.png

To access the Clocks window, customize the toolbar to add the Clocks icon, select it from the View menu, or use Control-C (or Control-Shift-C on PC) on your keyboard.

This section will cover the basics of how this window works; using clocks and countdowns on the Stage Display and in Messages will be covered in their own sections.

Current Time Format allows you to choose the way you want to display the system clock inside of ProPresenter.

Below that you can add an unlimited number of countdown clocks by pressing the plus button at the bottom right of the Clocks window. Each of these clocks can be set to Count Down Timer, Count Down to Time, or Elapsed Timer.

  • Count Down Timer: a standard countdown clock that runs for a given amount of time
  • Count Down to Time: allows you to indicate a specific time to countdown to
  • Elapsed Time: allows you to count up from a specific time, keeping track of the total time

If you change the time, click the Reset button to the left of the clock to update the time. Clicking Stop will pause the clock. Overrun allows a clock to continue running past zero. The buttons at the bottom will start, reset, or stop all of the clocks simultaneously.

If you want to change the Clock window to a floating window, click on the icon in the top right corner. To return it to a docked position, click on the same corner again.