SDI/NDI Module

The SDI Output module allows you to send an SDI signal directly to supported hardware.

Choose the appropriate device and mode that is required for your video system. This module is designed to work with Blackmagic video cards. Other SDI cards may work, but they are not supported.

In Preferences, click the Display tab and ensure that the Display at Top Most Window Layer is not checked. You also need to manually enter the output resolution for your SDI signal. If your output doesn’t look correct, verify that the Output Screen resolution is set for your SDI signal and not the connected DVI or VGA display.

If you are still having trouble with the signal, open the Blackmagic preference panel in System Preferences and make sure that Remove field jitter when video is paused is not checked and that When not playing video, send is set to Black. Both of these options are on the bottom of the Setting tab in the Blackmagic preferences panel.