Display

Display at Top Most Window Layer

Select this box to keep the ProPresenter output above any other windows on your output screen.

Scale to Fit Output Display

This will scale your presentation to the output resolution if they don’t match.

Enable Stage Display

This will enable the stage display on the indicated screen. You can also enable the Stage Display screen by pressing Command-2 on a Mac or Control-2 on a PC.

Configure Stage Display

This will bring up the stage display layout editor. This is covered in more detail later.

The Output (Out) and Stage Display (SD) outputs can be set within the Display preferences by clicking and dragging the indicators to the correct positions. Your computer screen is indicated by the white bar at the top of the box. Clicking on “Out” or “SD” will allow you to drag them to the correct screens.

System Display Settings

This will open the Display settings available in System Preferences.

Width, Height, Full Screen

These two boxes allow you to set a custom resolution for your primary output screen. If you want to use the full resolution, simply click the “Full Screen” button. This will use the resolution for the display that has “Out” assigned to it. If you are not using the full resolution, the arrows to the right will allow you to adjust the relative position of the output.

Screen Color

This specifies the default slide background color. This is the color you will see on your thumbnails and if no other background is selected. You can use any color.

Corner Pinning

Corner Pinning allows you to adjust each corner of the output independently. ProPresenter will calculate the distortion and adjust the image accordingly. This comes in useful if you need to make adjustments that aren’t available in your projector (such as horizontal or vertical keystoning). If your projector has the controls to adjust each corner, use those settings instead. Clicking Reset will change all of the values back to the default setting and any previous adjustments can not be restored.

You can toggle Corner Pinning on and off with the check box next to the button on the main Display preference panel.