Documentation
Tutorials
Download

Network

networkpreferences.jpg

Enable Network

In order to enable any network services, this checkbox should be checked. The Network Name and Port will be set automatically. It is unlikely that you will need to change the port number. Generally you would only need to change the port if you need to specifically route ProPresenter’s network traffic through a certain port due to network management requirements.

Enable Master Control

The Master Control Module is an add-on module for ProPresenter. It allows you to control other instances of ProPresenter. This module will be covered in more detail in the Master Control section of this user guide.

Enable ProPresenter Remote

In order to use the ProPresenter Remote app for iOS and Android you will need to enable this and enable the mode that you want available. You will also need to set a password.

Enable Stage Display App

In order to use the ProPresenter Stage Display app for iOS and Android you will need to enable this setting. You will also need to set a password.

Enable Text Stream for ProVideoPlayer 2

If you are using ProVideoPlayer 2, you can enable this setting for ProPresenter 6 to send it’s text output as a layer in ProVideoPlayer 2. Only the text from a slide is transmitted. Media, Messages, copyright info, and other slide objects are not sent via Text Stream.